SEHAN ELECTOOLS

SD Series has relatively low torque range and is suitable for tightening small screws.
It controls torque by regulating the amount of electric current consumption of the motor.
You can check target torque, converted torque, turns, count and time through the LCD display on paired controller, increasing its reliability.
The data can also be communicated and saved by link to PC or PLC. Use protocols to control the device and analyze data.
Handheld and automation models available. Vacuum pickup adapter option available.

Up to 8 different torque, speed and angle(Min/Max) presets savable to the memory
Each presets can be saved and chosen easily by the operator or sensors
Easy manual or automatic torque change
High durability, low noise, low heat, light weight
High efficiency is acheived by high speed
Error proof system by tightening quality monitoring and screw counting function
Tightening data management by serial communication with PC and PLC
Quick recognition of errors by displaying error codes
Changes RPM automatically when torque is changed(manual setting available)
Real time data monitoring through LCD display and data output by RS232C communication
Firmware upgrade by serial port

[BIT TYPE]

[SD-10PC CABLE]

[SDC-40 Controller]

NO	Item	Specification
1	Rated Input	AC120VC or AC220V, 50~60Hz, 3A
2	Rated Output	DC40V, 5A
3	Torque	1 ~ 28.0 Kgf.cm
4	Speed	300 ~ 1,000
5	Angle	0.1 Turn
6	Torque calibration	-10% ~ +10%
7	Operating environment	0 ~ 40℃ / 15 ~ 80% RH ( without dew )
8	Preset parameters	Torque, (Speed) & Angle
9	Preset # selecting	Front panel button 2) 25P I/O interface Direct connection external sensor
10	Screwdriver Info Recognition	Automatic recognition and correction by screwdriver's EEP Rom
11	Error Info Display	Divided into system, communication and pattern errors and displayed as codes
12	Tightening Quality Monitoring	OK/NG judgement by monitoring tightening time, turns etc.
13	Screw Counter	Save up to 8 different models, monitor OK tighteing counts
14	Monitoring Parameter Setting	Tightening data monitoring and parameter setting is possible by Smart Manager