Products
Precise Mechanism & Ergonomic Design
Precise Mechanism & Ergonomic Design
- Up to 5 screwdrivers can be connected
- OK/NG judgement to each tightening
- Displays number of screws left to be tightened
- Various types of cycle start/finish
- Shows signal and buzzer
- Tightening error info display
- When used with KT-38D and FT-40D, no other external power source is needed
Item | Description |
Input Voltage | • 30 ~ 40 V DC from KT-38D (FT-40D) • External Power of 24V DC, 1A for hybrid controller |
Used With | • KT-38D, FT-40D, HDC 35i, HDC-40i |
# of Programs | • 8 programs |
# of Counter | • 99 counts per program |
Screwdriver Ports | • KT-38D (FT-40D) : 4 • HDC-35i : 1 |
Communication Ports | • RS232C / USB (B) |
I/O | • Input 15 pins / Output 7 pins |
Program | • Scout manager (MS Windows) |
Parameter Setting | • Set with the buttons on the front panel or with Scout Manager software |
Program Share | • Up to 4 screwdrivers can share 1 program (with KT-38D and FT-40D) ※ Only 1 can be connected with KT-38D V4.3 or older |
| No. | Title | Write | Date | Hit | ||||
|---|---|---|---|---|---|---|---|---|
| No posts have been submitted. | ||||||||
