SEHAN ELECTOOLS

The HD-N Series screwdrivers are suitable for high torque demand.
Inserted air pressure sensor enables digital torque control and improved torque repeatability.
Displays tightening data such as target torque, actual torque, turns, screw count, time through PC or DATA Manager.
Tightening data output and remote control is possible by connecting to PLC.
Handheld or automation models are possible according to the working environment.

· Up to 8 different torque, speed and angle(Min/Max) presets savable to the memory

· Each presets can be saved and chosen easily by the operator or sensors

· Easy manual or automatic torque change

· High efficiency is acheived by high speed

· Error proof system by tightening quality monitoring and screw counting function

· Tightening data management by serial communication with PC and PLC

· Quick recognition of errors by displaying error codes

· Changes RPM automatically when torque is changed(manual setting available)

· Tightening data check by RS232C and USB communication

· Real time data monitoring and simple configuration by Hi-Manager(PC software)

· Firmware upgrade by serial port

[BIT TYPE]

[14PIN QUICK CHANGE ROBOT CABLE]

[HDC-35i Controller]

NO	Item	Specification
1	Rated Input	AC120VC or AC220V, 50~60Hz, 2.5A
2	Rated Output	DC35V, 4A
3	Torque	12 ~ 100 [Kgf.cm]
4	Speed	300 ~ 1,500 [rpm]
5	Angle	0.1 ~ 30
6	Torque calibration	-20% ~ +20%
7	Operating environment	0 ~ 40℃ / 15 ~ 80% RH ( without dew )
8	Input air pressure (bar)	min 4.5 bar / max 6 bar
9	Preset parameters	Torque, (Speed) & Angle
10	Preset # selecting	Front Panel button External I/O Direct external sensor connection F1 button on the driver
11	Screwdriver Info Recognition	Automatic recognition and correction by screwdriver's EEP Rom
12	Error Info Display	Divided into system, communication and pattern errors and displayed as codes
13	Tightening Quality Monitoring	OK/NG judgement by monitoring tightening time, turns etc.
14	Screw Counter	Save up to 8 different models, monitor OK tighteing counts
15	Monitoring Parameter Setting	Tightening data monitoring and parameter setting is possible by Smart Manager