Products
Precise Mechanism & Ergonomic Design
Precise Mechanism & Ergonomic Design
- Accuracy ±0.5%(at 20%~100% of the max torque range)
- Accuracy ±1%(at 10%~20% of the max torque range)
- Suitable for handheld electric screwdrivers, torque wrenches and air drivers(except impact wrenches)
- Track, peak and first peak mode
- 7 different torque units(ozf·in, lbf·in, lbf·ft, cN·m, N·m, kgf·m, kgf·cm)
- Quick Test Operation function available
- Software based on MS Windows
- Firmware install available using RS232 port and flash memory
- Measured data output by RS232C or USB
- Li-Ion battery with long life
- Can save more than 150 data points
- Real time torque graph on the software
- Go/No go : If the result is over/within the tolerance, Go or No Go LED
- Low-Pass Filter Option [ISO(500Hz), Ideal(170Hz), Asian(130Hz)]
Model |
H-100i |
H-50i |
H-10i |
Torque Range |
10 ~ 100 kgf.cm |
5 ~ 50 kgf.cm |
1 ~ 10 kgf.cm |
Unit |
kgf.cm, kgf.m, Nm, cNm, lbf.in, lbf.ft, ozf.in | ||
Mode |
Peak, Track, First peak | ||
Display |
Graphic LCD 00.0000 | ||
Accuracy |
±0.5% Reading of FS (20 ~ 100%) | ||
±1% Reading of FS (10 ~ 20%) | |||
Filter |
Asian, Ideal, ISO | ||
Data output |
Analog output / RS-232C | ||
Software |
Real time data down load throuh MS Excel by Data Acquisition Software | ||
Voltage |
DC 9V, 2A Overcharge protection, 10 hours use | ||
Dimensions |
185(W) × 105(D) × 55(H) | ||
Carrying bag |
Aluminum hard bag | ||
Accessories |
AC Adapter, Run down adapter, Data cable, Data Acquisition Software |
||
[EZ-TorQ II Interface Program - Real Time Graph Mode]
[EZ-TorQ II Interface Program - Real time data]
| No. | Title | Write | Date | Hit | ||||
|---|---|---|---|---|---|---|---|---|
| No posts have been submitted. | ||||||||
